X9100-GSM
GPRS Telemetry Engine with Camera Option
The
X9100-GSM Telemetry Engine is a low cost, M2M, universal
GSM/GPRS module which can transmit and receive analogue,
digital and pulse counter data to any device connected
to the GPS/GPRS network such as mobile phones, PC’s
and other X9100-GSM Telemetry Engines.
A Camera port is provided so that a photograph can
be emailed in response to a local alarm or a text
message. The unit is supplied with PC based Configuration
Software.
Security
The X9100-GSM Engine can email a Photograph to an
email address stored in the unit. An input can be
used to triggered the camera and transmit an image.
This can also be achieved in response to a text message.
Monitoring
and Control
The X9100-GSM Engine can send and receive digital
alarms, analogue values and pulse counter totals using
low cost SMS messaging. Both negative and positive
edges from digital inputs can trigger unique messages.
Analogue thresholds can be set on each input to trigger
different text messages. The two analogue outputs
can be set using a value sent in a text message.
Data
Logging.
The X9100-GSM Engine can be configured to store values
from the analogue inputs at preset times or when the
value changes by a pre-set amount. The data is stored
in the 128K Flash Memory and either down loaded on
request or at pre-set times.
Energy
Metering .
The 8 digital inputs can be configured to 8 pulse
counter inputs. The current value of each counter
can be transmitted using SMS Messages at pre-set times
or when a value has been exceeded.
PC2000
Monitoring and Control Software
A PC2000 SCADA Package is available for Monitoring,
Control and Logging from a PC. A Dual Band GSM Modem
PCMCIA Card is supplied with the package.
