X7700 Low Cost Lone Worker Alarm
The unit is housed in an ergonomic hi-impact casing and
features a two digit backlit display with function icons for
battery status, motion sensor activation, signal
transmission, sounder and charging status. The display will back light when transmitting or altering the operational status.
Product Details
Features:
Transmitter:
• Range 1-2Km through buildings
• LCD Status Display
• 10 sec warning before Alarm
• Alarm cancellation from the Transmitter
• Panic button.
• Motion Sensor.
• Pause facility.
• Rechargeable battery
Receiver:
• Alarm indication LED and voltage free contact.
• Supports up to 10 Lone Worker Alarm Transmitters.
• Mains power supply or 12Vdc Supply.
• Mains fail indication.
• RF Signal Strength Meter.
Description:
The radio alarm transmitter is a portable unit which clips to a belt and sends radio signals from the lone worker to the monitoring receiver. When the transmitter is removed from its charger it is immediately ready for use.
EMERGENCY BUTTON
When the two blue emergency buttons on the side of the transmitter is pressed together, the light on the display illuminates and the antenna icon is displayed while an alarm signal is transmitted. Pressing the top blue switch will cancel the alarm.
MOTION DETECTOR
If the transmitter does not detect any movement for a specified time, it emits a bleep to alert the lone worker. This may be cancelled by the lone worker by pressing the pause button or by tapping the unit and causing movement. If the alert is not cancelled, the LCD light illuminates and an alarm signal is transmitted. The Motion Detector can be disabled by pressing the two switched by the LCD Display and selecting zero.
RECEIVER
The monitoring receiver is a wall mounted unit which receives radio transmissions sent from Lone Worker transmitters. When an Alarm is received an associated relay is activated. The alarm remains active until reset by the Transmitter. The receiver is mains powered or by a 12Vdc power supply.