X9210 WLg-LINK WiFi Ethernet Gateway
The X9210 WLg-LINK can be configured as an Access Point, Ethernet Bridge, Bridge Router, WDS Repeater. It is fully compatible with MODBUS/TCP and PROFINET protocols.
Product Details
Features:
• RJ45 10/100 auto-sensing Ethernet Interface.
• 54/108 Mbps wireless Ethernet link compliant to the IEEE 802.11 a/b/g/h
& SUPER AG standards, OFDM, DSSS, 2.4 / 5 GHz.
• Rapid roaming (less than 50 mS in single channel mode).
• 2dBi omnidirectional 2.4 / 5 GHz antenna, RP-SMA connector.
• Range 100m-300m line of sight extended to 5 Km with a 22dBi Antenna.
• Built-in ATHEROS's chip set: AR5414 (AR5006SX.
• Transmit power +20dBm.
• Receiver Sensitivity -92dBm in a/g modes) and -95dBm inb mode.
• 64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS
supplicant & authenticator), MAC addresses filtering, SSID broadcast control.
• Configuration from standard internet web browser.
• LED indication of LAN, WLAN network activity and 10/100 mode.
• Size L :103 x W :67 x H :24 mm.
• Power: +5VDC, 3.5W.
• Operating temperature range : 0°C to +70°C.
• Humidity: 5% to 95% (non-condensing).
:
In Access Point Mode the X9210 WLg-LINK module creates an industrial WiFi wireless network for any equipment with a 10/100 Ethernet Interface.
The X9210 WLg-LINK when configured in Bridge Mode can connect any industrial equipment featuring a 10/100 Ethernet interface to the WiFi wireless network.
Radio coverage can be increased by configuring an X9210 WLg-LINK module in Repeater Mode. The device supports both INFRASTRUCTURE and AD-HOC modes.
The X9210 WLg-LINK can be configured to make wireless bridge between MODBUS/TCP or PROFINET protocols and a wireless network.
The device is configured using a web browser such as Internet Explorer, Netscape or Mozilla.