X9211 WLg-IDA/N WiFi Ethernet Gateway

Product Details

Features:

• Two RJ45 10/100 auto-sensing Ethernet port interface.
• 54/108 Mbps wireless Ethernet link compliant to the IEEE 802.11 a/b/g/h
& SUPER AG standards, OFDM, DSSS, 2.4 / 5 GHz.
• Rapid roaming (less than 50 mS in single channel mode).
• 2dBi omnidirectional 2.4 / 5 GHz antenna, RP-SMA connector.
• Range 100m-300m line of sight extended to 5 Km with a 22dBi Antenna.
• Built-in ATHEROS's chip set: AR5414 (AR5006SX).
• Transmit power +20dBm.
• Receiver Sensitivity -92dBm in a/g modes) and -95dBm inb mode.
• 64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS
supplicant & authenticator), MAC addresses filtering, SSID broadcast control.
• Configuration from standard internet web browser and C-Key.
• LED indication of LAN, WLAN network activity and 10/100 mode.
• Alarm Relay for power failure, LAN or WLAN connection failure.
• Size 110 x 50 x 120 mm.
• Dual input DC power supply 9VDC to 36VDC), 4.5W.
• Operating temperature range : -20degC to +70degC.
• Humidity: 5% to 95% (non-condensing).
• Standards : MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations)
EN 301489-17 & EN 61000-6-2 (EMC), IP 30.

Description:

In Access Point Mode the X9211 WLg-LINK module creates an industrial WiFi wireless network for any equipment with a 10/100 Ethernet Interface.

When configured in Bridge Mode it can connect any industrial equipment featuring a 10/100 Ethernet interface to the WiFi wireless network.

Radio coverage can be increased by configuring an X9210 WLg-LINK module in Repeater Mode. The device supports both INFRASTRUCTURE and AD-HOC modes.

The X9210 WLg-LINK can be configured to make a wireless bridge between MODBUS/TCP or PROFINET protocols and a wireless network.

The device is configured using a web browser such as Internet Explorer, Netscape or Mozilla.