Part
No |
Product
|
Product
Description |
Data
|
X8100
|
|
X8100
XNET Transceiver
The
X8100 Wireless Telemetry unit transmits and receives
analogue, digital and pulse counter signals. It is programmed
by the user with an individual node address.
Each
Wireless Telemetry input is then configured to appear
as an output on any distant XNET receiver.
The
X8100 Wireless Telemetry unit can support up to 128
Digital Inputs, 128 Analogue Inputs, 128 Digital Outputs,
128 Analogue Outputs plus a Serial Gateway for SCADA
packages.
|
DS151
DS162
AP123
AP124
AP125
|
| Part
No |
Product
|
Product
Description |
Data
|
TX8100
|
|
TX8100
Wireless Telemetry Transmitter
The
TX8100 wireless telemetry transmitter has all the functionality
of the X8100 transceiver, but has digital, pulse counter
and analogue inputs only.
|
DS151
DS162
AP120
AP121
AP125
|
|
Part
No |
Product
|
Product
Description |
Data
|
TX8100LP
|
|
TX8100LP
Low Power Transmitter
The
TX8100LP radio telemetry transmitter has the full functionality
of the X8100 but is designed to operate from batteries,
solar panels, wind generators or some other dc source.
A
standby period and a transmission period is programmed
into the unit along with the node number and destination
of the inputs. |
DS151
DS162
AP120
AP121
AP125
|
|
Part
No |
Product
|
Product
Description |
Data
|
|
RX8100
|
|
RX8100 Receiver
The
RX 8100 receiver has all the functionality of the X8100
XNET Transceiver, but has digital, pulse counter and
analogue outputs only.
|
DS151
DS162
AP120
AP121
AP125
|
|
Part
No |
Product
|
Product
Description |
Data
|
|
TX7120
|
|
TX7120
Low Cost, Rugged Transmitter
The
TX7120 transmitter has 4 digital inputs, 1 analogue
input or pulse counter. A transmission occurs either
when any input changes or at pre-programmed intervals.
An LCD display is used to display the current value
of the digital and analogue inputs.
A simple back to back link can be implemented using
a RX7120 receiver or group of TX7120 transmitters can
configured to a single RX8100 receiver.
|
DS158
AP127
AP120
|
|
Part
No |
Product
|
Product
Description |
Data |
|
RX7120
|
|
RX7120
Low Cost Rugged Receiver
The
RX7120 receiver has 4 relay outputs, 1 analogue output,
1 serial output and a link fail relay output. The
received data is displayed on a LCD display.
The
RX7120 receiver can be used in conjunction with either
a TX7120, TX8100 or X8100 wireless telemetry transmitter.
|
|
| Part
No |
Product
|
Product
Description |
Data |
|
X8120
|
|
X8120
Internet Data Acquisition and Control Module
The
X8120 enables data to be sent across Ethernet or Internet
links.
-
Five
Analogue inputs (0-20 mA or 0-5 V)
-
Eight
Digital inputs or outputs
-
One
8-bit counter
-
Ethernet
interface - UDP/IP - ICMP, ARP
- User-programmable
parameters through an RS232 serial PC connection
- Graphical
user interface on a PC
- Software
and source-code for system-integration
- Digital
inputs/outputs can be linked from one unit to another
over Ethernet/Internet (requires PC server)
|
|
| Part
No |
Product
|
Product
Description |
Data |
|
X8140
|
|
X8140
GSM Telemetry Module
The
X8140 is a universal module for remote control and
monitoring. It allows information transmission of
eight logical inputs and eight logical outputs using
the SMS service of a GSM network.
SMS
messages can be received and transmitted by any device
in the GSM network (e.g. cellular phones, controlling
computer with GSM modem) and an X8140 device can also
be controlled from Internet using SMS gateways.
The
function of inputs, access phone numbers and passwords
are fully user-adjustable using PC software included
with the module.
|
|
| Part
No |
Product
|
Product
Description |
Data |
|
TX103
|
|
TX103
Hand Held Encoder
The
X103 and X107 Hand Held Encoder provides a remote
portable switch controller with a range of up to 10-20Km
in free space and 1-3Km in buildings.
|
|
| Part
No |
Product
|
Product
Description |
Data |
|
RX105
|
|
TX105
Base Station Receiver
The
RX105 provides a base station for the TX103 and TX107.
The Voltage free contacts outputs correspond to the
switch operations on the TX103 Transmitter.
|
|
